Model: Project - Specifications for Fact Table: PROJECT ACTIVITY INFORMATION

On this page you will find the specifications regarding the Model: Project and Fact Table: PROJECT ACTIVITY INFORMATION.

Note: Please refer to documentation of each model to find out about attributes used in referenced models.

Attributes

Attribute	Description (where applicable)
Control Category Key	Represents the Control Category Key
Activity Seq Key	Represents the Activity Sequence Key of the fact

Measures (table to be generated as far as possible)

Aggregation of measures is based on SUM if not explicitly noted.

This section describes the basic measures in the cube. These are either measures defined in the core Information Source, in the model itself or in the ETL process. The columns have the following meaning:

• Core Measure: A measure that has its origin in a core Information Source
• Calculated Y/N: A measure specifically defined for the model, e.g. percentages etc. These measures do not derive from the Information Source.
• Contains Time Intelligence Y/N: Some measures do also have additional time intelligence measures like Year To Date (YTD) Se separate section.
• Definition/Note: Specifies if there is a specific logic behind a measure. More information might also be found in documentation for Information Sources.
• Aggregation Type: Specifies the aggregation type of a measure.
• Hidden Y/N: Specifies if a measure is hidden and there by not visible to the end user when browsing the model.
• Measure Expression: The DAX expression in the measure definition.

Measure	Calculated Y/N	Contains Time Intelligence Y/N	Definition/Note (where applicable)	Aggregation Type	Hidden Y/N	Measure Expression
Actual Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ACTUAL])
Actual Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ACTUAL_HOURS])
Actual Rev	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ACTUAL_REVENUE])
Baseline Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[BASELINE])
Baseline Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[BASELINE_HOURS])
Committed Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[COMMITTED])
Committed Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[COMMITTED_HOURS])
Cost Progress %	Y	N			N	IF([Planned Cost Progress Basis] > 0 , [Earned Value Cost Progress Basis]/[Planned Cost Progress Basis], BLANK())
Cost Progress % RC	Y	Y	Reporting Currency calculation		N	IF([Planned Cost Progress Basis RC] > 0 , [Earned Value Cost Progress Basis RC]/[Planned Cost Progress Basis RC], BLANK())
Earned Value Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[EARNED_VALUE])
Earned Value Cost Progress Basis RC	N	Y	Reporting Currency calculation		N	SUM([REP_CURR_EARNED_VALUE_COST_EXCLUDE_FROM_WAD])
Earned Value Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[EARNED_VALUE_HOURS])
Estimated Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ESTIMATED])
Estimated Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ESTIMATED_HOURS])
Estimated Rev	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[ESTIMATED_REVENUE])
Hours Progress %	Y	N			N	IF([Planned Hours Progress Basis] > 0 , [Earned Value Hours Progress Basis]/[Planned Hours Progress Basis], BLANK())
Planned Committed Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PLANNED_COMMITTED])
Planned Committed Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PLANNED_COMMITTED_HOURS])
Planned Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PLANNED])
Planned Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PLANNED_HOURS])
Planned Rev	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PLANNED_REVENUE])
Posted Rev	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[POSTED_REVENUE])
Preliminary Rev	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[PRELIMINARY_REVENUE])
Project Margin	Y	N			N	[Actual Rev]-[Actual Cost]
Project Margin %	Y	N			N	IF([Actual Rev] > 0 , [Project Margin]/[Actual Rev], BLANK())
Scheduled Work Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[SCHEDULED_WORK])
Scheduled Work Hours	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[SCHEDULED_WORK_HOURS])
Used Cost	N	N			N	SUM('PROJECT ACTIVITY INFORMATION'[USED])

Time Intelligence Measures

Time based measures are calculated in the cube with respect to other measures. The table below defines the meaning/definition of  the different time measures. These measures need to be used with a specific time dimension hierarchy [REPORTING_DATE].[RepDateMFHy].

Measure	Meaning
YTD	Aggregated value for current month in current  year. E.g. for period 202010 Ytd represents sum of periods 202000-202010.
R12	For a given period, the sum all months from one year back up to the previous month. E.g. Rolling 12 for 202010 is the sum of months 201910 - 202009
PY	Previous Year The value of the corresponding month one year back. E.g. for month 202010, the value of month 201910.
YTD PY	Year to Date Previous Year Aggregated value for corresponding month one year back. E.g. for month 202010 YTD Previous Year represents sum of months 201901-201910.
R12 PY	Rolling 12 (completed) Months Previous Year For a given month, first going one year back, then taking the sum of all months from one (more) year back up to the previous month. E.g. for month 202010 the sum of month 201810-201909
Avg XXX Ytd	Sum XXX YTD/Count XXX YTD
Avg XXX R12	Sum XXX R12/Count XXX R12
XXX % YTD	Count XXX YTD/Count YYY YTD
XXX % R12	Count XXX R12/Count XXX R12

USED BY MODEL(S)

Model Name

Data source Information

The data source for this object is defined using IFS Developer Tool. Further Transformations are done using Power BI.

Additional information can be found in the online documentation of Information Sources.

Model Table	BI Access View	Referenced Information Source	Recommended Access Type
PROJECT ACTIVITY INFORMATION	FACT_PROJ_ACTIVITY_INFO_PQ_BI	FACT_PROJ_ACTIVITY_INFO_PQ	On Line